  0095 |
 |
Return to Vacucoat 0095
|
Vacucoat 0095 Instructions For Use: Application: The surface areas to be protected must be clean and dry. This means in detail that they must be free of oils and greases, humidity, dust, rust, etc. This is normally achieved by water washing, solvent degreasing or blasting. After thoroughly stirring the contents in the tin, the paint is applied to the surface areas to be protected like an oil paint by brushing, immersion, spraying or feeding. Only one coating of uniform thickness is necessary to provide safe protection. Drying time normally ranges between 3 and 5 hours, depending on the ambient temperature and humidity. The coating must be thoroughly dry before the coated parts are put into the furnace. Coated pieces should not come into contact with each other, in order to prevent unwanted protection in non-coated areas or, on the other hand, protection defects in the coated areas. After heat treatment is completed, the residues of the paint can be easily removed from the work pieces by washing with hot water or alkaline, either after quenching in oil (respectively with pressurized gas) or after tempering. |
 |
Gas Carburizing |
|
|
Carbonitriding |
|
|
Vacuum Carburizing |
|
|
Nitriding |
|
|
Ion Nitriding |
|
|
Nitrocarburizing |
|
|
Scale Prevention |
|
|
Thinners |
