Condursal Stop Off Paints for the heat treating industry
N9
Condursal Stop Off Paints for the heat treating industry

STOP-OFF PAINT FOR:
PROTECTIVE COATING FOR ION NITRIDING
Gas Carburizing & Carbon Nitriding, Nitrocarburizing, Ion Nitriding, Pack Carburizing and Scale Prevention, Spark Igniters, Duffy-Catalyst, Duffy-Stainless Foil, Refractory Plugs, Nuts & Bolts, Baskets, Alumdum Balls, Heat Treating needs

  • Condursal N9
    A specifically formulated protective paint for ion nitriding at temperatures of 750-1085 Degrees F. Due to the excellent electric conductivity of the N-9 layer, there is no problem getting an electrical connection between the work piece to be nitrided and the cathode base plate. Normally only one coat coverage is required. Application can be attained by brushing or dipping. Residual of CONDURSAL N9 can easily be removed after heat treatment by brushing or wiping.
Condursal Stop Off Paints for the heat treating industry

Pricing (per can)
1-5 cans
6+
case lot
CN-N9 (quart)
$87.00
$86.00
$85.00 (48)
Duffy Special Thinners
1-5 cans
6+
case lot
CN-QT White Label
$8.00
$7.75
$7.50 (40)
CN-GAL White Label
$20.00
$19.50
$19.00 (10)

Click Here To Order
MSDS
Instructions
  • Properties
    CONDURSAL N9 is a special protective paint for ion nitriding at temperatures approximately 750 - 1085° F. Because of the excellent electric conductivity of the N9 layer, there is no problem getting and electrical connection between the work piece to be nitrided and the cathodic base plate.
    CONDURSAL N9 is easy to apply and remove. The steel surfaces to be protected must be free of oil, grease and dirt, which can be accomplished by alkaline washing or degreasing with chlorinated solvents.